New JL Industries RHDG energy efficient roof hatches

Ebuildingproducts is proud to announce that we now carry the industry's first energy efficient roof hatch. The roof hatch is called  "Diamond" for its new Diamondgrip  flashing that allows you to install the curb membrane without tools. It is manufactured by JL Industries.

The Diamond Grip Roof Hatch is also energy efficient. It comes  with a 1 inch thick polyisocyanurate insulation in both the curb and the lid,  providing an R-6 thermal rating. It has a beautiful textured baked on powder coat white enamel paint that reflects the heat caused by the sun. 

Due to the new construction techniques, the Diamond roof hatches cost less to ship because they are  17% lighter than previous models. 

New Spring design allowing easier one handed operation while on a ladder. 

Other Specifications:

* CURB: 14 gauge galvannealed steel single wall with Diamond grip counterflashing. 

* COVER: 14 gauge galvannealed steel formed and welded with 22 gauge liner tested to support a live load of 40 psf ( pound per square foot ). 

* INSULATION:  1" polyisocyanurate in curb and cover providing an R-6 thermal rating

* HOLD OPEN ARM: Clear zinc plated automatic locking hold open arm with RED vinyl grip for one handed door operation. 

* SPRING: perfectly counterbalanced compression springs making it easier to open. 

* LATCH: Clear zinc plated steel slam latch with inside and outside handles and padlock hasp with a wind uplift rating of 50 psf. 

Standard Sizes available

36 " x 30"  RHDG-1WT for ladders

30" x 30"   RHDG-2WT  for stairs

30" x 96"   RHDG-3WT for stairs

36" x 36"   RHDG-4WT for ladders

48" x 48"   RHDG-5WT for stairs

32" x 72"   RHDG-6WT for stairs

37" x 30"   RHDG-7WT for ladders.

Let you next roof hatch be as cool as you are. 

Save time, save money order now. Diamond Series Roof Hatch

Customer Service 

1-855-832-8453

  

Karp-GFRG-FGH access door

Karp has a new hinged Fiberglass Reinforced Gypsum access door for walls and ceiling.
This door comes standard with hinge and lock.Karp GFRG-FGH 

New Pdf flipbook for Karp Associates concealed access doors

https://www.flipsnack.com/Ebuildingproducts/karp-associates-concealed-access-doors.html

Karp Concealed Access Doors

 Hello. I just  created a PDF  Flipbook for all the  Karp Associates concealed access doors.

https://www.flipsnack.com/Ebuildingproducts/karp-associates-concealed-access-doors.html

FG, RDW, RDWPD, KDW, KRP-350FR, KRP -450FR

Oval Fire Extinguisher Cabinets

This is a post about the new low profile ADA compliant fire extinguisher cabinets and where to buy them. There is also a link to buy the Oval Fir Extinguishers. Enjoy....

This Orbit Fire Extinguisher Cabinet Features a Low Profile Tub to Accommodate the Orbit FE10V Fire Extinguisher as well as the  new  Oval Fire extinguisher. Select from a Recessed Model to Fit Into a 3 5/8” Stud Wall or a Surface-Mount Version. Both Styles Meet the ADA 4” maximum requirement for protruding objects.

Door and Trim Construction: Flush cabinet doors with a 5/8" door stop are attached by a continuous hinge and equipped with zinc-plated handle and roller catch. Doors with glazing have clear acrylic glazing.

Finish Choices:

• Powder-coated Steel
• # 4 Satin Stainless Steel
• US 10 Satin Bronze
• US 3 Polished Brass
• # 180 Clear Anodized Aluminum

Door & Trim Construction: Cold rolled steel with white powder-coated finish, anodized aluminum, stainless steel with # 4 finish, US3 polished brass or US10 satin finish bronze. Flush cabinet doors with a 5/8” door stop are attached by a continuous hinge and roller catch. Recessed models are equipped with zinc-plated handle and surface mount have flush pull handle. All models have 1-3/4” wide trim on frame and 1-1/4 trim on doors with glazing. Doors with glazing have clear acrylic glazing.

Trim Style & Depth: Recessed - Flat 3/8” Trim.  Surface Mount - 4” total depth for ADA compliance.

Tub: Constructed of cold rolled steel with white powder-coat finish standard. Extinguisher rests on a 1” high shelf.

Here is a link to view the submittal data sheet Oval Fire Extinguisher Cabinet

Here is alink to buy Oval Fire Products Ebuildingproducts  use search term "Oval".

Saf-T -Lok explanation Saf T Lok

Call 1-855-832-8453 for more information. 

OVAL low profile fire extinguisher

We are excited to introduce a new low profile Fire extinguisher. The OVAL Brand Low Profile Fire Extinguishers are revolutionary in their design as they have solved several problems that have been an ongoing problem for many years. Oval Brand is the only fire extinguisher which always complies with the ADA, ICC and the IFC protruding object requirements when surface mounted. Due to its slim design, it can easily fit into a standard 2 x 4 wall without using a semi-recessed or surface mounted extinguisher cabinet. Flush cabinets are now always an option. When surface mounted with its proprietary hook, it only protrudes 3 1/2 inches from the wall making it blind, low-vison and wheelchair friendly. It also has a proprietary hook making it almost impossible to knock it off the wall.

Cabinets are optional due to the unique flat shape and shallow depth of the Oval Brand fire extinguisher; a recessed cabinet is not required to comply with ADA, AODA, ANSI, ICC, IFC and ISO protruding object limits. 

The OVAL Extinguishers are available in three models. The 10 JABC is best suited for hanging in an OVAL Fire Extinguisher Cabinet, also available at https://www.ebuildingproducts.com  The 10 HABC is best used as a surface mounted extinguisher with Proprietary hook.  And the 10 HPKP (Purple K) designed for high-performance use on Class B & C fires.

OVAL low profile fire extinguishers

Call 1-855-832-8453 now 

Thank you

Karp Concealed Access Doors

Concealed Access Doors are the latest trend in construction. Architects and building owners like the new look of concealed seamless access doors where you can hardly see them without knowing where they are installed.

What makes an access door appear to disappear ?  Make it with the same materials as the ceiling it is being installed in, gypsum.

Currently there are two methods to achieve this stealth-like invisibility. You can have a gypsum drywall insert  or make the door out of gypsum and fiberglass.

Insert model RDW. This style is recessed to accept a 5/8 inch piece of drywall. The drywall
should be attached with drywall adhesive and 1.25 inch self drilling drywall screws. RDW Data Sheet Submittal

Insert model RDWPD is an improved version of the RDW as it has the  5/8 inch drywall installed by the factory. This makes for a faster and cleaner install. The door is secured by screwdriver latches.
RDWPD Data Sheet Submittal

Insert model RDWPD with touch latch. A touch latch is a latching devise where all you need to do to open the door is simply push on the door and it will unlatch and swing down.

Insert model  KAD model. This is a door with  the 5/8 inch drywall insert factory installed and it has a touch latch. The frame is made of Aluminum and the door can be removed for maximum clearance.




Gypsum model FG This is Karp's version of the GFRG which stands for Glass Fiber Reinforced Gypsum. Other manufacturers call it "Seamless Access door and Stealth Access door. These ceiling access door are made of a blend of gypsum and fiberglass fibers.   Karp FG Data Sheet Submittal

Gypsum model FGH This is a hinged version of a GFRG access door for walls.

Gypsum model FG with  square corners

Metacaulk Firestopping Pass Thru Devices

Metacaulk® Pass-Thru Devices

are pre-firestopped and are

designed to allow electrical, data

or communication cables and pipes

to penetrate fire-rated floors and

walls. They consist of a square or

round section steel sleeve which

contains intumescent material.

When exposed to heat, intumescent

materials expand to form a insulating

char plug which restricts the spread

of flame, toxic gases, smoke and

water. Each device is supplied with

2 end plugs which are inserted

after the cable or pipe has been

installed to reduce smoke leakage.

The devices have an excellent “L” air

leakage rating The devices can be

opened for easy installation, retrofit

or removal of cables. The devices are

installed using specially designed

mounting brackets which clamp onto

the device and require no additional

attachment to the wall or floor. 

Here are several images of Metacaulk Pass Thru Devices

We are a stocking distributor located in Maryland. 

Go here to buy Firestopping Pass Thru Devices
ebuildingproducts.com

Call 1-855-832-8453 for additional information.

Thanks

Foam 2 Foam Adhesive

Foam 2 Foam, what is it, where do you use it?

   Most anyone who has done any renovations regardless of their skill level, at some point in time has used expandable foam to seal doors, windows, holes to keep out insects, cold weather and moisture. Home owners know this as an expandable foam that seals and insulates. Renovators and DIY know the one other characteristics is that it is EXTREMELY sticky. If you have ever gotten foam on your fingers, it is darn near impossible to get off. Once this foam dries, it becomes hard.

    It is the sticky nature of the expandable foam that professional contractors began using it to glue
construction materials together. This has become the preferred method to adhere dissimilar materials
that require a strong lasting bond that is not affected by moisture or temperature swings.

If you need to buy any Foam 2 Foam, you can go here Foam 2 Foam. Buy a case of 12 and we will give you a free application gun.
Call Ebuildingproducts for more info 1-855-832-8453
ebuildingproducts.com

See you next time...

EIFS Fastener Depth Stop

Do you Install EIFS wall systems? Then you are familiar with using a special tool called a depth stop. The depth stop is a metal adjustable driver that sets the screw fastener at a constant predictable depth so all your washers are set and sealed properly. That was the good news.The bad news is that periodically, the manufactuer stops making it. We don't understand why but several times we have had to remove the depth stop form our website. The better news is that they are back and in stock. We would suggest that you stock up on them  as there is no other tool available
that does what the depth

stop does.  Buy now while they are still in stock EIFS Fastener Depth Stop  1-855-832-8453

ebuildingproducts.com

Thank you 

Intumescent Pipe Collars

Intumescent Pipe Collars are prefabricated for through-penetration firestop systems using PVC, CPVC, ABS, PVC foam core, ABS foam core, FRPP, PEX pipe and Electrical Cable. Designed to reduce installation time by 25% and the simple locking mechanism insures easy installation. Metacaulk® Pipe Collars are economical because no backfill is usually required. The pipe collars intumesce meaning that when a fire happens, the piping will melt away and the  collar will quickly expand to fill the hole preventing fire and smoke from spreading. Click on the following link for pipe collar pricing and available sizes. Click the link now to see our amazing prices. These are in stock and ship out same day. Intumescent pipe collars

Call 1-855-832-8453 for questions

Carve 360 Cordless Hot Knife

CARVE360 BATTERY POWERED HOT KNIFE

Ebuildingproducts is proud to introduce the CARVE360™ Cordless Hot Knife.  It’s designed to handle the rigors of everyday use on a professional job site with a rechargeable lithium-ion battery that supplies 36 volts of long lasting power.  No cumbersome power cord means you have the flexibility to move in any direction without worrying about getting tangled up or being able to reach your target.

• Includes a 4" and 6" blades.
• Hard plastic storage case and blade cleaning brush.
• It ships with two Lithium-ion batteries that reach full charge in just over an hour ensuring users won’t have any costly down time.
• A custom blade adapter is included with the tool, making it easy to use all of Demand Products’ hot knife accessories and blades.
• The variable heat control feature allows users to dial in the exact heat setting needed to work with a variety of foam materials. 
• The CARVE360™ heats up instantly every time.
• Weighing in at just 37oz.
• The ergonomically designed cordless hot knife is comfortable for daily use.

With its flexibility, durability and dependability, the CARVE360™ Cordless Hot Knife is sure to become a favorite in every worker’s toolbox. Follow this  link Carve 360 Hot Knife

OVAL Fire Extinguishers from OVAL Brand Products for sale

NEW PRODUCT ANNOUNCEMENT !

     OVAL Brand oval shaped fire extinguishers and cabinets now available at E Buildingproducts.com

   A gentleman named Kevin Kozlowski invented this fire extinguisher. After many prototypes and tests, he finally succeeded. 


   Because of the unique oval shape and shallow 3inch depth of the Oval Brand fire extinguisher, a recessed cabinet is not needed to comply with ADA, AODA, ANSI, ICC, and ISO protruding object limits. However if cabinets are desired, choose any 12 inch width x 27 inch height cabinet from the catalogs of the manufacturers of fire extinguisher cabinets and ask for the “Oval” option. 

Go here to buy the OVAL Brand Fire extinguishers
We will also be selling the Oval fire extinguisher cabinets.  

Oval Fire extinguishers are only  3 1/2 inches deep and can be installed in a standard  2 x 4 wall.  

 Visit our youtube video OVAL fire Extinguishers
 
    The OVAL finish has a durable, environmentally-conscious powder coat finish. Stainless steel and anodized aluminum components are rust-proof and attractive.
Proprietary innovation. Constructed of tempered space-age metals. Nearly dent proof. Tough, elegant, and corrosion free. Easy to service and recharge.


  The OVAL Extinguishers are available in three models. The 10 JABC is best suited for hanging in an OVAL Fire Extinguisher Cabinet. The 10 HABC is best used as a surface mounted extinguisher with Proprietary hook.
And the  10 HPKP designed for use in Kitchens.

 OVAL Brand oval shaped fire extinguishers and cabinets now available at E Buildingproducts.com
OVAL Brand Fire extinguishers

When it comes to fire extinguisher innovations, OVAL is the new round.