Product Data sheets / Product Submittal Available

Just a reminder that Product Data Sheets/ Submittals are available on this blog for the  following Manufacturers:

Karp Asscoiates
Acudor
JL Industries
Maxam Metals
The Steel Network ( TSN )
Metacaulk Firestop
PVC Accessories for  EIFS, Stucco  and  Drywall
Windlock
Demand Products

Light Gauge Steel Hip Connector

This weeks post : We are going to introduce a light gauge steel connector called  a Hip Connector. There is a company called  The Steel Network that manufactures a clip that is used
used in the cold formed steel industry to connect the roof rafters together. Normally , roof rafters are connected to the ridge beam. When  using wood ,the rafters are nailed. In the light gauge steel network, they are screwed into place with steel  clips as you can see from  the  photo .

TSN's clip is available  in 6 sizes. 4inch, 6 inch, 8 inch, 10 inch , 12inch  and  14 inch.
The clips are made with a  135 degree angle. They are made of Grade 50 type H Steel.
Visit E Building Products for great prices on TSN Clips. 1-855-832-8453

Wind Lock Stealth Access Door

Todays post is about the  Stealth Access Door  manufactured by Wind Lock. Wind Lock  was the first manufacturer who used the term "Stealth " to describe their unique ceiling access door. The stealth door is manufactured out of  GFRG which  stands for Glass Fiber Reinforced Gypsum. Contractors usually just call them Fiberglass access doors. They are used for ceiling applications in drywall ( gyp-board ) ceilings. The installation is easy . The framing layout for these doors must be done prior to hanging the drywall on the ceiling. The stealth doors are available  both round and rectangular sizes with an optional hinge for the rectangular doors. How to install a stealth access door. They rectangular doors come in commercial sizes :
9 x9 , 12 x 12 , 16 x 16 , 18 x 18 , 24 x 24
The residential non hinged doors are available  in 22 x 30 and  30 x 30
The round doors are available in  12 inch , 16 inch , 18 inch  and  24 inch  diameters.

Visit E Building Products for a complete selection of  Wind Locks Stealth Access doors

Metacaulk 835 Silicone Firestop Sealant

Today we introduce a Firestop caulk manufactured by Matacaulk. It is model 835+.
This is a Firestop Sealant that is silicone based. It can  be used on a variety of materials and systems.
It is non sag meaning it can be used in vertical applications. It has a STC ( Sound Transmission Coefficient ) of 55 enabling it to maintain the sound deadening characteristics of a wall.

It is a flexible sealant that can be used on steel, glass pipe, steel duct work, Closed PVC piping systems, control  joints in  both interior and exterior applications.

Metacaulk 835+ comes in 10.5 oz tubes and  5 gallon  pails. Visit our store for pricing E Building Products.  If you need to see a Product Data Sheet for  Metacaulk 835+ Click Here

Maxam FDL-250 Access Door

  Todays post introduces the largest fire rated access door on  the planet. It is manufactured
by a company out of Canada called Maxam Metal Products. Maxam's beginnings started as a small
family owned sheet metal  company in British Columbia, CANADA back in 1945.

 Maxam has taken  the access door business to new heights by providing the largest 3 hour fire rated ceiling access door ever made. This access door has a double leaf door with a removable mullion. This serves two purposes. It facilitates passage for larger equipment and it makes the doors lighter to open.

  The FDL-250 has a 16 gauge frame and a 18 gauge panel. It comes standard with a concealed continuous hinge, flush allen key latch and a very cool closer making it much safer to close the door.

The Maxam FDL-250 is available in the following sizes for a ceiling application. 48 x 36, 48 x 48, 60 x 24, 60 x 30
60 x 36 and 60 x 48.  It is available in stainless steel or prime painted.

If you want to see a full product data sheet Maxam FDL-250 Product Data Sheet.

Visit our site if you are in the market for a Maxam FDL-250

Plastic Component's Direct Applied Surface Mounted Beading

Plastic Component's  manufacturers several  beading options for the  Direct Applied DA industry.
The first is a surface mounted "J" Bead model 2201
 
A surface mounted "J" bead design that protects the bottom edge of the sheathing board and eliminates the need for costly back wrapping.It is available in 3 sizes, 3/8", 1/2", 5/8".

The second  type is the Surface Mounted  "L" Bead model 2221. This is manufactured in 4 sizes, 3/8", 1/2", 5/8" and  1".
 
A surface mounted "L" bead to be used at windows, doors or any termination point. Extra wide surface flange makes it possible to adjust and fill any gaps caused by short trimming of the sheathing board. Wide flange has striations and perforations to provide a positive bond of base to sheathing board. Has built-in 1/8" (3 mm) stop to ensure proper thickness of base and finish.

 The third type is model 2221-45 which is a 45degree angled bead

APPLICATION:

Angled Termination Bead is a surface mounted 45º angle bead that can be used around windows, doors or any termination point as a backing for perimeter sealant application. All exposed surfaces have striations that provide positive bonding of caulk and base material. Angled portion is 5/8" (16 mm) wide and has a built-in 1/8" (3 mm) stop to ensure proper base and finish thickness.

 

The final type is know as a "Z' mold or  "Shadow molding"  
This is available in  three  sizea, 1/2" , 3/4" and  1".

APPLICATION:

Shadow Mold/"Z" Mold provides a reveal or relief detail around windows, doors, and wall to ceiling junctions. Can be used in either vertical or horizontal position.

Visit us at E Building Products

JL Industries Security Cabinets for Extinguishers, Fire Hose and Valves

JL Industries manufactures a line of security and detention cabinets that are meant to store  fire
extinguishers, fire hose and  fire department valves. These cabinets are available with a fire rated option as well as a stainless steel option. The Security Series cabinets are available with a recessed, semi recessed and  surface mounted option making it easy to pick the option that fits your needs.

The steel cabinets come in 12 gauge steel and the Stainless Steel cabinets are 14 gauge . There is a Duo Panel door option that has a polycarbonate window .

Security Fire Extinguisher Models Available
SFC-11   10 1/2   x 24 x 7 recessed
       - 15   12 x 27 x 8 1/2  recessed
       - 12   10 1/2 x 24 x 7 semi  recessed
       -16    12 x 27 x 8 1/2  semi recessed
       - 13   13 x 26 1/2 x 8 surface mounted
       -17    14 1/2 x 29 1/2 x 10 surface mounted

 Fire Department Valve  models available
Security Valve Cabinet SVC

SVC -11    18 x 18 8 1/2 recessed
         - 12   18 x 18 8 1/2 semi recessed
         - 13   20 1/2 x 20 1/2 x 10 surface  mounted

SHC Security Hose Cabinet

Models Available
SHC - 11   32 3/4 x 34 3/4 x 8 recessed
         -12    32 3/4 x 34 3/4 x 8 semi recessed
         - 13    36 3/4 x 38 3/4 x 8 surface mounted

When  you order any of these products, you will need to fill out what options you need from this
Security Cabinet Product Data Sheet by JL Industries and we will get you a price ASAP.

Thank you

Karp Associates KRP-450FR Fire Rated Access Door

Todays Product Review is on Karp Associates KRP450FR . Karp Associates is a leading  manufacturer of Access doors since 1956. Karp had two flagship fire rated access door for years.
The  KRP-150FR and the KRP-250FR. The access door industry realize that there was a need for
fire rated doors for drywall applications where the door could look more invisible by eliminating the
frame or flange. They replaced the solid flange with drywall bead. The door should be installed prior to the finishing of the drywall. The KRP 450 FR comes with a standard white powder coat paint finish and can be ordered in Stainless Steel. The door comes with an  easy to open  lockable paddle latch.The door is rated at 1.50 hours and is suggested for walls only.

Feel Free to visit our store to review all the access doors we carry. Here is a KRP-450FR Data Sheet

Plastic Components PVC Trim Accessories

   Todays post is about a line of Plastic PVC trim accessories we sell that is manufactured by a company called Plastic Components. Plastic Trim pieces are used in both the interior and exterior of both residential and commercial construction.

   One of the most recognized trim piece is the Outside Corner Bead  and  Inside Corner Bead. These are used to Trim out drywall to give it a clean  finished look. Here are pictures of what they look like.

Other Plastic PVC trims are used in the  Plaster and Stucco trades. Here is a link to see the variety available PVC Trim Accessories for Stucco and Plaster. Plastic Components has an  exclusive product called "ULTRA TRAC" channel reveals.
Here are pictures of what they look  like

Since the Plastic Components product line is so vast, I will provide another post highlighting
additional  line items. Visit us at E Building Products . You will find our service exceptional  and our prices competitive. Get yours while the prices are cheap. 1-855-832-8453

Acudor DW 5058 Recessed Access Door With Touch Latch

Todays Post is on Acudor's DW 5058 Recessed Access Door with a Touch Latch.

The Acudor DW-5058 is designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. This door is standard with a touch latch feature. Designed to accommodate 5/8" drywall, the frame can be reversed to accommodate 1/2" drywall. The innovative aspect to this door is the  touch  latch. No more fumbling with screwdrivers and stripped screws. This door is also furnished with  a drywall  flange to apply drywall mud so the finished product looks seamless.  If you want to see a Product Data Sheet,  Click Here

Karp Associates NEW MXPL Exterior Access Door for Plaster and Stucco

   Today's post is regarding a new access door manufactured by Karp Associates. It is Called
MXPL.  Karp is pleased to introduce our new MXPL Insulated Exterior Access Door that is engineered to withstand years of exposure to severe outdoor elements. This high-quality, galvanized steel door comes with a galvanized hinge. The combination of these components with Karp's electrostatic rust-inhibitive powder finish provides two durable protective layers.
To further weatherproof the door, Karp arc-welds and grounds smooth the corners of the trim and pan, which with the addition of closed-cell neoprene gasket and a Lift & Turn Compression Latch, ensures a watertight seal between the door and frame.
Finally, the door includes Styrofoam insulation that provides exceptional resistance to water and water vapor. All of these protective measures guarantee the MX Insulated Access Door's long-term performance even in the most severe moisture conditions. The MXPL is manufactured with Plaster Lath for seamless installation in Plaster and stucco walls.
The MXPL Insulated Access Door is available in standard 12"x12", 18"x18", 24"x24", 30"x22", 30"x30", 36"x24" and 36"x36" sizes, as well as custom sizes as specified.

 

Buy The Karp MXPL at E Building Products

Demand Products Carve 360 Cordless Hot Knife

Today's post focuses on a BRAND NEW product from Demand Products called the
Carve  360. This has just been  released and is currently available on pre order basis only.

CARVE360 BATTERY POWERED HOT KNIFE

Demand Products is proud to introduce the CARVE360™ Cordless Hot Knife.  It’s designed to handle the rigors of everyday use on a professional job site with a rechargeable lithium-ion battery that supplies 36 volts of long lasting power.  No cumbersome power cord means you have the flexibility to move in any direction without worrying about getting tangled up or being able to reach your target.

• Includes a 4" and 6" blades.
• Hard plastic storage case and blade cleaning brush.
• It ships with two Lithium-ion batteries that reach full charge in just over an hour ensuring users won’t have any costly down time.
• A custom blade adapter is included with the tool, making it easy to use all of Demand Products’ hot knife accessories and blades.
• The variable heat control feature allows users to dial in the exact heat setting needed to work with a variety of foam materials. 
• The CARVE360™ heats up instantly every time.
• Weighing in at just 37oz.
• The ergonomically designed cordless hot knife is comfortable for daily use.

With its flexibility, durability and dependability, the CARVE360™ Cordless Hot Knife is sure to become a favorite in every worker’s toolbox. Follow this  link Carve 360 Hot Knife

Call E Building Products 1-855-832-8453 or email info@ebuildingproducts.com to  reserve yours today.

Acudor FW 5050UP Product Announcement

Todays post is about a fire rated access door manufactured by Acudor called FW 5050 UP.

    This is a unique door where it actually opens inward or upward depending if it is installed in  a wall or ceiling. For years , access doors have always swung into the room. This can be both difficult
and dangerous. It can be difficult to open a swing down access door to gain access into the space when there are walls, pipes or equipment in the way. There are options to install an  access door with a removable door but that option is not available with a fire rated door. Acudor came up with a great option, a swing up door.

If you have an area that requires a fire rated access doors that is
located in a crowded area,  you might consider a swing up door from E Building Products.

Like us on Facebook
Until next week.....

Acudor WD-8000 Walk Through Door

    Today's product  review is on Acudor's WD-8000 Walk Through Door. Acudor is a leading  manufacturer of  access doors. Access doors are generally smaller in size  just big enough to get your  arms in to access valves ,dampers etc. Acudor saw a need to make larger doors so people could access Air Handling units. What is an Air handling unit ? An Air handling unit is a much larger version of the  A/C ductwork in your home and are normally located on the roofs of  commercial buildings. The purpose of a Walk Through Door is to allow maintenance personnel to gain  access to greese fittings, change filters even do repairs such as change bearings, fans etc.

    The WD -8000 is made of galvanized steel and is insulated with a R-4 rating. Typical sizes available are 24 x 36 all the way up to 30 x 72. The door can  be  made to withstand  high pressure. I can  speak  from experience, standing in an air handling unit when it accidentally starts can be very intimidating. The pressure will pin you against the wall !

    Acudors Walk Through door can be ordered with a vision panel, lockable handles.

Visit E Building Products and see the huge selection of ACCESS DOORS we offer.

   

Karp Associates FG access door

   Todays post is  on Karp Associates FG Access door. The FG stands for  Fiber Glass. This is a brand new door by Karp that is made for drywall ceilings. The FG door is easy to install and provides an  aesthetically pleasing  seamless appearance. The fiberglass makes it easy to paint. The doors come in  a variety of sizes such as 9 x 9, 12 x 12, 16 x 16, 18 x 18 and  24 x 24.  The rough opening is  6 inches larger than  the  door size you need. Installation is easy. Cut the rough opening, fasten the frame to the ceiling. Apply  drywall mud ( Spackle) to the perimeter to blend it into the surrounding drywall, sand and paint. Then  all you do is drop the door in from the top. Here is a Karp FG access door Product Data Sheet. E Building Products stocks a full line of access doors.

Here are other Fiberglass access doors made by Wind- Lock  .
Call us  at 1-855-832-8453 for more information

JL Industries Smoke Vents

  This  weeks product  review is on J.L. Industries "Smoke Vent" . What is a smoke vent?  Just as the  name implies , it is a roof hatch with a set of double doors placed on a roof of a commercial building that will automatically open during a fire to vent any smoke.

   How does a smoke vent work ? All smoke vents have a  165 degree fusible link device that will open the doors automatically once the  fusible link is activated. When the air temperature reaches  165 degree, the fusible link will melt allowing the spring operated doors to open. The doors can be
reset and a new fusible link can  be installed, ready for the next fire emergency.

   Smoke vents can be be equipped with solid doors  as shown  above or can be purchased with acrylic domed doors to allow light in.

E Building Products has the  knowledge you need to help pick the smoke vent you need.
Sizes available are : 48 x 48, 48 x 72, 48 x 90, 48 x 96, 60 x 60, and  60 x 96.
Call us  at 1-855-832-8453

Trowels and Floats

    This Weeks product review is on construction trowels and floats. There has always been
confusion as to what is the difference between  trowels and floats and when do use them. I guess I can  make a generalized statement that trowels are used to spread material such as drywall spackle,  mortar, adhesive, plaster and even  concrete and are not meant to be a finishing tool with the exception of a drywall finishing trowel Drywall curved finishing trowel and a plaster finishing trowel
Now you can  see why there is so much confusion.

Trowels can be notched if they are being used to spread mortar and  adhesive for laying tile and formstome.
Notched Trowel

What is a float ? A Float is used to provide a smooth finished look depending on what product you are working with. Float can have a rubber pad used to spread  tile grout. Floats are used to finish plaster and EIFS wall systems. Italian float E Building Product carries one of the most extensive selection on Trowels and floats made by Marshalltown. 

The Steel Network's Driftclip DSLB product review

This weeks product review is on a product called Driftclip manufactured by The Steel Network.

      The Steel Network TSN DriftClip® DSLBis a Light gauge steel framing connector available to accommodate vertical deflection and lateral drift requirements. Step Bushings pre-installed in vertical slots allow up to 2” vertical deflection (1” up and down). Horizontal slots accommodate 2” lateral drift (1” left and right--in-plane), with Step Bushings also pre-installed during the manufacturing process.

You may find a full line of clips and connectors for the  Light Gauge Steel Framing  industry at
 E Building Products

Expandable Foam adhesive

    This weeks review is on Expandable foam adhesive. Expandable foam has many uses but the most recognizable use is for filling air gaps in windows and doors. I can  tell you from personal experience that you must be careful to use low pressure foam in windows and doors. If you don't, you will not be able to open the windows and door and will have to remove them. It is a costly and time consuming lesson.The other tip for you is to use a little foam at a time as it expands 2-3 times what you spray.

  Expandable foam is also used in  the construction industry to fasten foam ( styrofoam) forms to the exterior of building in the ICF, EIFS and SIP industries. Foam can be purchased in a single can , single component with a built in spray nozzle  manufactured by DOW called Enerfoam or in a professional kit,  manufactured by Wind Lock called  Foam 2 Foam.


Please visit our store at E Building Products to see our full line of expandable foams.
 

Product Review : Channel Reveal by Plastic Components

      This weeks product review is about a PVC plastic trim manufactured by Plastic Components called Channel Reveal. This plastic trim is used by contractors when applying the stucco or plaster to the exterior of commercial buildings. This process is called DEFS. ( Direct Applied Exterior Finish System) Here is an official definition of DEFS. You may view and purchase a full line of  Plastic PVC trims at E Building Products.     1-855-832-8453